OMRON
Home >> Products >> OMRON >> Master slave station products >> CompoBus/S >> SRT2-OD04CL Waterproof Terminals

SRT2-OD04CL Waterproof Terminals

OMRON SRT2-OD04CL Manual And Instructions
SRT2-OD04CL datasheetPDF datasheet
SRT2-OD04CL HOST CONNECTION MANUAL
SRT2-OD04CL User's Manual

OMRON SRT2-OD04CL Product information and technical parameters:
Brand: OMRON
Name: Waterproof Terminals
Model: SRT2-OD04CL
Input/Output: Outputs.
Internal I/O circuit common: NPN (– common).
I/O points: 4 points.
I/O connection method: Sensor connector.
Rated voltage for I/O power supply: 24 VDC.
Eight Waterproof Terminal Models.
Emphasizing Cost Efficiency.
Reduced Labor.
Connection using connectors reduces the lead time,
required for installation. No tools are required for,
connection to a variety of devices.
Reduced Wiring.
Signal line wiring has been reduced so that the,
Terminal can be mounted closer to sensors and,
other devices.
Relay Box not Required.
Environment-resistant, dust-tight, drip-proof,
construction (IP67) enables direct on-site,
mounting.
Easier Maintenance.
Significant reductions not only in setup time but also,
maintenance time.
Reduced Space, Improved Operability,
Compact design (160 x 54 mm (W x H)) (8-point models).
Settings and connections can be performed using,
the switch and connectors on the front side of the Terminal.
System Configuration.

Name: Two-tier Screw Terminal Block.
Specifications: Inputs/Outputs;
8 inputs/8 outputs; PNP.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system SRT2-OD04CL.
A wide variety of CompoNet Slave Units,
contribute to system size reduction SRT2-OD04CL
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Short/disconnection detection: Supported.
Specifications: Inputs, PNP (- common), 32 points SRT2-OD04CL.
I/O connections: Clamp terminals.
Rated internal circuit power supply voltage:
Supplied from communications connector.
Rated I/O power supply voltage: 24 VDC.
Reduced Wiring and Labor on Factory Sites with Screw-less Terminal Wiring.
Screw-less structure eliminates tightening work.
Detachable terminal blocks for easier maintenance.
Single-step wiring by simply inserting pole terminals SRT2-OD04CL. Input 8 points corresponding to NPN (+ public)
Remote I/O terminal (transistor connector type 4 point /8 point)
Achieve business card in half the size of the connector input type
Can switch between long range / high speed communication mode.
A product with 4 points and 8 points.
Save space.
Small size of X H45mm W58mm.
Through the cable leads to the direction of the reunification of the above, can reduce the occupied area.
With input short circuit protection function.Input/Output: Inputs.
Internal I/O circuit common: PNP (– common).
I/O points: 8 points.
I/O connection method: Sensor connector.
Rated voltage for I/O power supply: 24 VDC.
Eight Waterproof Terminal Models.
Emphasizing Cost Efficiency.
Reduced Labor.
Connection using connectors reduces the lead time,
required for installation. No tools are required for,
connection to a variety of devices.
Reduced Wiring.
Signal line wiring has been reduced so that the,
Terminal can be mounted closer to sensors and,
other devices.
Relay Box not Required.
Environment-resistant, dust-tight, drip-prroof,
construction (IP67) enables direct on-site,
mounting SRT2-OD04CL.
Easier Maintenance.
Significant reductions not only in setup time but also,
maintenance time.
Reduced Space, Improved Operability,
Compact design (160 x 54 mm (W x H)) (88-point models) SRT2-OD04CL.
Settings and connections can be performed using,
the switch and connectors on the front side of the Terminal.
System Configuration.


...More relevant models >>>>